Module Identifier EAM1420  
Academic Year 2004/2005  
Co-ordinator Dr Bill Perkins  
Semester Semester 2  
Other staff Dr Nicholas J G Pearce  
Pre-Requisite EAM1120  
Course delivery Lecture   16 Hours  
  Seminars / Tutorials   2 Hours Oral presentation  
  Practical   32 Hours Taught practicals  
  Practical   20 Hours Group project work  
  Other   Oral presentation by students reporting the results of the green field/brown field study  
Assessment TypeAssessment Length/DetailsProportion
Semester Assessment Continuous assessment of laboratory notebooks and practical write ups70%
Semester Assessment Oral project presentation10%
Semester Assessment Written project report (2500 words)20%
Supplementary Assessment Re submit failed elements of coursework 

Learning outcomes

On successful completion of this module students should be able to:
1. Work safely in a chemical analysis laboratory

2. Prepare a range of different sample types for chemical analysis using advanced techniques

3. Select and apply the most appropriate analytical technique/calibration strategy for the chosen analyte within a range of complex matrices

4. Make analytical measurements on a range of advanced analytical instruments with due consideration to safety and data quality

5. Use reference materials to assess the accuracy of analytical techniques

6. Write laboratory and technical reports

7. Design and implement a sampling and analytical protocol to assess a field site for a wide range of contaminants

Brief description

This module will be a practically-based course which will provide training in safe laboratory procedures for the inorganic analysis of environmental materials. The module will start with sample preparation and dissolution, then consider classical analytical techniques and go on to cover a wide range of advanced instrumental analytical techniques. The module will emphasise the importance of quality control and assurance in analytical chemistry and will cover calibration techniques. A series of laboratory exercises will be assessed through laboratory notebooks and practical write ups. The students will also work on a group project to assess the geochemistry of a potential development at a selected green field or brown field site.


  1. Sample preparation prior to analysis - storage, drying, disaggergation etc.
  2. Sample dissolution - partial and total digestion methods
  3. Chemical separation techniques - ion exchange
  4. Classical analytical techniques - gravimetry, titrimetry
  5. Instrumental methods - flame based (flame photometry, atomic absorption spectrophotometry)
  6. Instrumental methods - plasma based (ICP-OES and ICP-MS)
  7. Ion chromatography
  8. Laser ablation
  9. Ion/electron methods - XRF, XRD, EMPA, Ion beam methods

Reading Lists

** Recommended Text
Gill R (ed) (1997) Modern analytical geochemistry: An introduction to quantitative chemical analysis techniques for earth, environmental and materials scientists Longman Geochemistry
Potts, P.J. (1987) A handbook of silicate rock analysis Kluwer Academic Publishers;
Mendham, J. et al. (1999) Vogel's Textbook of Quantitative Chemical Analysis. Longman
Harris, D.C. (2002) Quantitative Chemical Analysis W H Freeman


This module is at CQFW Level 7